| Accessories for the MicroCompounder and MicroInjector
MicroCompounder
Fiber Spinning Nozzles for MicroCompounder. Part # 20100
Set of 6 nozzle attachments for fiber spinning (0.5, 0.75, 1.0, 1.25, 1.5 and 1.75 mm diameter).
MC-MI Transfer bracket. Part # 20500
Bracket and nozzle set to aid the extrusion of material from the MicroCompounder into the MicroInjector barrel.
Film die and take-up system. Part # 20105
This accessory consists of a special film die to extrude strips 12 mm wide max. and amotorized take up system to quench and collect the extruded film.
Continuous Feed Screws & Hopper. Part # 20106
This accessory consists of a special set of mixing screws with extended flight section and a hopper to continuously feed material from the top of the MicroCompounder.
MicroInjector
VISE. Part # 50010
This optional vise is useful for holding the barrel of the MicroInjector while loading it with polymer and heating it until the polymer is completely melted. The vise comes with a heavy metal base for added stability.
|
