Go to DACA's homepage

GODET MODULE
Picture of Godet The Godet is used to pull the filament from the Piston Extruder and to stretch the filament from one Godet to the other. The Godets can be configured to perform hot or cold drawing of the filaments using 80 mm stainless steel godets which can generate 7.1 Nm of torque. The speed of their high torque stepper motor can be controlled accurately from 0.05 to 700 m/min.

Technical Specifications
(subject to change without notice)

Electrical
115 or 220 VAC, 50/60 Hz, 3 Amp, 1 phase

Motor Torque: 7.1 Nm (1000 oz.in.)

Dimensions:
19 cm W x 43 cm D x 48 cm H
(7.5" W x 17" D x 19" H)
Weight: 30 Kg (66 lb)
back to DACA home page back to SpinLine page The link to the catalog page
| HOME | SPINLINE | PRODUCTS |