 WINDER MODULE |
 The Winder is the final unit on the SpinLine.The Winder uses standard 80 mm diam. spools for collecting the processed fibers. The speed of the spool is proportional to the speed of the second Godet and calibrated to take up the filament with a small amount of tension. The speed of the traverse guide on the winder module is independently controlled to produce a variety of filament overlap patterns. The spacing between adjacent filaments can be controlled from 0.5 mm to 27 mm. This module uses standard 80 mm OD plastic spools but can accommodate spools from 25 mm to 75 mm ID. The width of the movement of the traverse guide is also controllable by adjusting the knobs in front of the traverse guide. Technical Specifications Electrical Motor Torque: 2.14 Nm (300 oz.in.) Dimensions: 35.5 cm W x 38 cm D x 34 cm H (14" W x 15" D x 13.5" H) |
   | HOME | SPINLINE | PRODUCTS | |